Epson 3865X Plus User Manual page 62

2. Enter.
Press
submenu and you see the following:
Not
360 KB
720 KB drive (3.5")
1.2
1.44 MB drive (3.5")
You also see this message below:
Selected drive light is ON
This tells you that the light on the diskette drive currently
selected is on.
3. If you want to change the drive A settings, be sure
Drive A:
change the drive B settings, highlight
Enter.
press
4. Use 4 or t to highlight the correct type for your diskette
drive and press
drive type you selected.
If you want to enter the type for another diskette drive,
return to step 3.
5. When the diskette drive settings are correct, highlight
** SAVE SETTINGS **
block returns to the main Setup menu and you see the
updated information for drives A and B.
The cursor block moves into the diskette drive
installed
drive
M B d r i v e
is highlighted and press
The cursor block moves into the submenu.
Enter.
The screen displays the new diskette
Running the Setup Program
Enter.
If you want to
Drive B :
Enter.
and press
and
cursor
The
2-27