Epson 3865X Plus User Manual page 54

2. To select
Hard disk drive,
menu such as the following:
Drive 1:
Number of cylinders 977
Number of heads
Number of sectors
Precomp. cylinder
Landing zone
Total capacity (MB)
The submenu lists the settings you can change for each
drive: the number of cylinders, the number of read/write
heads, the number of sectors, the precompensation cylinder,
and the landing zone (the cylinder on which you park the
heads when moving the computer). It also displays the total
storage capacity in megabytes.
3. If you want to change the settings for drive 1 (which is
drive C on most computers), press
Drive 1:. If you want to change the settings for drive 2,
Enter
press
4. Enter.
Press
None
Type
User
5. If you have disconnected the drive or if the drive does not
exist, highlight None and press
settings become 0. Go to step 8.
Type 17
5
17
300
977
40.5
and then + to highlight Drive 2:.
You see this submenu:
17
defined
Running the Setup Program
Enter. You
press
Number of heads
Number of sectors
Landing zone
Total capacity (MB) .0
Enter
to highlight
Enter.
All the drive
see a
0
0
0
2-19