Epson 3865X Plus User Manual page 184

2. To set the path for the VGAMODE utility, type the
following and press
PATH C:\pathname\
For instance, if you were using the example directory
described above, you would type :
PATH C:\SET\
3. Press F6 and then
See your MS-DOS Reference Manual for more information
about pathnames.
Using the Utility
The VGAMODE utility program allows you to specify the
number of rows (lines) and columns on the screen. You specify
these values in the VGAMODE program by typing them on the
VGAMODE command line.
The format of the command is:
VGAMODE [columns], [rows]
Valid values for columns are 80 and 132; for rows, use 25, 43 or
50.
For example, if you want your screen to display 132 columns
with 25 rows, type the following and press
VGAMODE
To use VGAMODE, you must configure the application
program that uses VGAMODE for the same screen size. Each
program has a section in this appendix explaining how to
configure it.
Enter:
Enter.
132, 25
Using the VGA Utilities
Enter:
A-39