If you inserted the Reference diskette to run the AFDD
program, remove it now.
If you want to change the drive assignments, press S. The
system reboots and loads MS-DOS, and the new drive
assignments take effect.
If you do not want to change the drive assignments, press any
other key.
If you are running the AFDD program from a hard disk, you can
reassign the drives without viewing the message. Type the
following command and press
AFDD /S
The /
S
switch tells the AFDD program to reset the computer
and change the diskette drive assignments without displaying
the message.
Enter:
Enhancing System Operations
4-9