Advertisement
Lowest
Item
Value
CW Prog
0
Alpine
0
Rndm Prog
0
UB Revs
0
Comm Lost
0
Key Down
0
BATT LOW
0
REPL BATT
0
LED Test
N/A
Keypad Test
N/A
Heart Rate
N/A
Test
FAN TEST
N/A
CSAFE TEST
N/A
Measurements
N/A
UB
N/A
CALIBRATION
T
ROUBLESHOOTING
STAR TRAC E SERIES TOTAL BODY TRAINERS perform a self-test at the beginning of every workout. If a problem is detected, a
message displays before or after the workout, depending on the nature of the problem. Star Trac recommends that you refer your ques-
tions about your STAR TRAC E SERIES TOTAL BODY TRAINER operation and suspected malfunctions to Star Trac's Service Hotline
at (800) 503-1221, or USA 1-714-669-1660.
SERVICE MESSAGES
The following messages are displayed if the associated problem is detected during self-test.
I
- One or more keys on the display panel are stuck in the "on" position. This can occur if a user presses keys before
the system is turned on, or if a key is held down for more than 10 seconds. Call Star Trac Product Support for assistance if the
message continues to display.
STAR TRAC E SERIES TOTAL BODY TRAINERS O
Highest
Default
Value
Value
Meaning
65535
0
Number of times the Continuous Watts Program was run since last reset.
65535
0
Number of times the Alpine Pass Program was run since last reset.
65535
0
Number of times the Random Hill Program was run since last reset.
65335
0
Number of times the upper body system completed a full revolution.
65535
0
Number of times a "Communication Lost" condition occurred since last reset.
65535
0
Number of times a "Key Down" condition occurred since last reset.
65535
0
Number of times battery voltage measured between 5.3 and 5.7 volts.
65535
0
Number of times battery voltage measured below 5.3 volts.
N/A
N/A
Access to integral LED test function (for use by authorized Maintenance
Technician).
N/A
N/A
Access to integral keypad test function (for use by authorized Maintenance
Technician).
N/A
N/A
Access to integral heart rate system test function (for use by authorized
Maintenance Technician).
N/A
N/A
Access to integral FAN TEST function(for use by authorized Maintenance
Technician)
N/A
N/A
Access to integral CSAFE TEST function (for use by authorized Maintenance
Technician)
N/A
N/A
Access to integral Measurements function (for use by authorized Maintenance
Technician).
N/A
N/A
Access to integral Upper Body system calibration function (for use by author
ized Maintenance Technician).
'
M
WNER
S
ANUAL
27
Advertisement
