STEP 10.
Using a #2 Phillips head screwdriver, remove
the (4) screws that hold center console to the
display and remove the screw that holds in the
blank cover where the new headphone jack
mount will go.
Next detach the center console ribbon cable
then remove the center console and the blank
headphone cover.
use.
Note: You will no longer need the center console
and headphone jack cover, both can be stored away
for any possible future use.
STEP 11.
Take the new PVS center console from the kit.
STEP 12.
insert the new center console into the front dis-
play. Using a #2 Phillips screwdriver, screw in
the (4) screws that were saved from the original
center console. Tighten the screws so they are
snug.
13
Retain screws for later
620-7991 Rev 002