Table of Contents
Advertisement
Highlighting the Install button and pressing the
Highlighting the Cancel button and pressing the
the software. If the upgrade package file is not installed on the DVR properly, you will get an
error message.
CAUTION: The system restarts automatically after completing the upgrade, and it takes
approximately one minute to restart. Do NOT remove the USB device until the DVR
restarts, otherwise the system upgrade will not be completed properly.
CAUTION: The USB device must be FAT16 or FAT32 format.
Select the desired setup file and press the Import button to import the selected settings and change
the DVR settings accordingly. Highlight Include Network Setup and press the
between On and Off. When set to Off, the network settings will not be changed.
Highlight the box beside File name and press the
enter the file name. Selecting Export will save the current settings in .dat file format on the USB
device.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related
settings (Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log... and press the
4- & 8-Channel Digital Video Recorder
button will install the selected software package.
button will close the window without upgrading
You can import saved DVR settings or export the
current DVR settings. To import saved DVR settings,
connect the USB device containing the setup file (.dat)
to the DVR. Highlight Setup – Import... and press
the
button.
To export the current DVR settings, connect the USB
device to the DVR. Highlight Setup – Export... and
press the
button.
button. A virtual keyboard allows you to
button to display the System Log.
The System Log screen lists system activities
(up to 5,000 from the latest) that have occurred
along with the time and date. The
displayed in the last column for system activities
of the remote site. You can scroll through the
log pages by using the Up and Down arrows, or
you can go directly to a log page by entering the
log page number in the box at the bottom left of
the screen. Highlight Close and press the
button to exit the screen.
To export the system log information, connect the USB
device to the DVR. Highlight Export... and press the
button.
button to toggle
icon will be
15
Advertisement
Table of Contents
