Changing The Type Of Thumbnail Screen - Sony PMW-F3K Operating Instructions Manual

Changing the Type of Thumbnail
Screen
The type of thumbnail screen can be changed by
pressing the THUMBNAIL button repeatedly.
In HD mode
Each time you press the button, the normal
thumbnail screen, OK-Clip thumbnail screen, and
All-Clip thumbnail screen are cyclically
displayed.
In SD mode
Each time you press the button, the normal
thumbnail screen and All-Clip thumbnail screen
are alternately displayed.
Displaying the OK-Clip thumbnail screen
(HD mode)
The OK-Clip thumbnail screen shows only the
clips marked OK among the clips on the current
SxS memory card.
Pressing the THUMBNAIL button with the
normal thumbnail screen displayed displays the
OK-Clip thumbnail screen.
For operations of the OK mark in E-E Display mode,
see "Adding the OK Mark" on page 60.
For operations of the OK mark in Thumbnail Screen
mode, see "Adding/Deleting the OK Mark to/from a
Clip (HD Mode Only)" on page 96.
Displaying the All-Clip thumbnail screen
The All-Clip thumbnail screen shows all clips
both of HD and SD modes recorded on the current
SxS memory card, permitting you to check
whether the card contains any clips of another
mode than that currently selected.
In HD mode, pressing the THUMBNAIL button
with the OK-Clip thumbnail screen displayed
displays the All-Clip thumbnail screen.
In SD mode, pressing the THUMBNAIL button
with the normal thumbnail screen displayed
displays the All-Clip thumbnail screen.
Note
You cannot start playback from the All-Clip
thumbnail screen.
Press the THUMBNAIL button again to return to
the normal thumbnail screen, and playback and
clip operations are enabled.
Switching the SxS memory cards
When two memory cards are loaded, press the
SLOT SELECT button to switch memory cards.
Note
You cannot switch memory cards during
playback.
Continuous playback of cards in slots A and B is
not possible.
Thumbnail Screens 89