Others Menu - Sony PMW-F3K Operating Instructions Manual

OTHERS Menu

OTHERS
Menu items
All Reset
Resetting to the
factory status
Camera Data
Storing/recalling
the menu settings
LUT Memory
Storing/recalling
user LUT data
3D-Link
Setting the 3D-
Link mode
ND
Adjustment
Setting the
sensitivity of ND
filter
Time Zone
Setting the time
difference
Clock Set
Setting the built-in
clock
124 Setup Menu List
Subitems and setting values Contents
Execute/Cancel
Store
Execute/Cancel
Recall
Execute/Cancel
Store
Execute/Cancel
Recall
Execute/Cancel
Mode
Off / Main(L) / Sub(R)
Send Main Data
Execute / Cancel
Iris Position Sync
On / Off
Focus Position Sync
On / Off
Zoom Position Sync
On / Off
Iris Offset
–99 to +99 (±0)
ND Clear
0 to 999
ND 1(1/8)
0 to 999
ND 2(1/64)
0 to 999
UTC –12:00 to +14:00
(UTC)
Date/Time
12H/24H
12H / 24H
Date Mode
YYMMDD / MMDDYY /
DDMMYY
Select "Execute" to reset the camcorder to the factory status.
Select "Execute" to store the setting values in an SxS memory
card.
Select "Execute" to retrieve the setting values from an SxS
memory card.
Select "Execute" to store five user LUT data on an SxS
memory card collectively.
Select "Execute" to recall five user LUT data from an SxS
memory card collectively.
Set the 3D-Link operation mode.
Off: To not use 3D-Link
Main(L): To specify the camcorder for the main unit (Left)
Sub(R): To specify the camcorder for the sub unit (Right)
Select "Execute" to collectively copy the camera settings for
the main unit to the sub unit.
Set to "On" to link the iris position on the sub unit to that on
the main unit in real time.
Set to "On" to link the focus position on the sub unit to that on
the main unit in real time.
Set to "On" to link the zoom position on the sub unit to that
on the main unit in real time.
Adjust the lens iris on the sub unit with that on the main unit
when the lenses on both units are linked to move.
Adjust the user adjustment value when the ND filter is set to
"Clear."
Adjust the user adjustment value when the ND filter is set to
"ND 1 (1/8)."
Adjust the user adjustment value when the ND filter is set to
"ND 2 (1/64)."
Set the time-zone difference from UTC in steps of 30
minutes.
Set the current time and date.
Select the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Select the display mode of the date.
YYMMDD: In sequence of year, month, day
MMDDYY: In sequence of month, day, year
DDMMYY: In sequence of day, month, year