Sony PMW-F3K Operating Instructions Manual page 114

CAMERA SET
Menu items
Horizontal Inv.
Setting the image
inversion function
Lens IF
Selecting the lens
interface
Zoom Speed
Setting the zoom
speed (only with a
power zoom lens
attached)
Zoom
Transition
Setting the zoom
operation with the
ASSIGN 6 and 7
buttons (only with
a power zoom lens
attached)
MF Assist
Turning the MF
Assist Function
on/off (only with a
power zoom lens
attached)
S-Log White
ADJ
Adjusting
individual
variability of
preset white
(3200K) for S-Log
outputs
114 Setup Menu List
Subitems and setting values Contents
On / Off
Type C / Type A / Off
Assign
8 to 99 (50)
Remote
8 to 99 (50)
Linear / Soft
On / Off
R Offset
–499 to +499 (±0)
B Offset
–499 to +499 (±0)
Set to "On" to horizontally invert the image.
Select the appropriate lens interface in advance before
attaching a lens.
Type C: For lenses with a Cooke-type connector and those
supplied with the PMW-F3K
Type A: For lenses with a ARRI-type connector
Off: For other lenses
Set the speed of zooming with the servo zoom lever on the
grip.
Set the speed of zooming with the ZOOM T/W button of the
IR Remote Commander.
Note
If the infrared line from the Remote Commander is not
received properly, zooming may not operate smoothly.
Set the operation mode at the beginning and end of zooming
with the on-handle ASSIGN 6 and 7 buttons.
Linear: Zooming is performed at the same speed from the
beginning to the end.
Soft: Zooming is slowly performed at the beginning and the
end.
Set to "On" when MF (manual focus) mode is selected to
precisely adjust the focus on the subject in the center of the
screen after you roughly adjust the focus on that subject
operating the focus ring and stop operation.
Precise focusing, however, is not executed if you stop
operating the focus ring when the subject is not focused
roughly.
Adjust the R level.
Adjust the B level.