Sony PMW-F3K Operating Instructions Manual page 129

OTHERS
Menu items Subitems and setting values Contents
2)
Copy All
Clips
Setting for
collective copy of
General Files
clips and/or
General files
Clips&General
Plan.Metadata Load/Slot(A)
Execute / Cancel
Setting planning
metadata
Load/Slot(B)
Execute / Cancel
Properties
Execute / Cancel
Clear
Execute / Cancel
Clip Name Disp
Title1 (ASCII) /
Title2 (UTF-8) / Off
Network DHCP
Enable / Disable
Setting for
network
IP Address
connections
0.0.0.0 to 255.255.255.255
(192.168.1.10)
Note
Subnet Mask
The CBK-WA01
0.0.0.0 to 255.255.255.255
Wi-Fi Adapter and
(255.255.255.0)
installation of the
Default Gateway
CBK-RGB01
0.0.0.0 to 255.255.255.255
RGB and S-LOG
(0.0.0.0)
Output Option are
required.
User Name
(admin)
Password
(pmw-f3)
Set
Execute / Cancel
MAC Address
Net Config Reset
Execute / Cancel
To copy all clips on an SxS memory card to the other.
(Select "Execute" on the confirmation screen to begin.)
To copy all files in the General folder on an SxS memory card
to the other.
(Select "Execute" on the confirmation screen to begin.)
To copy all clips and files in the General folder on an SxS
memory card to the other.
(Select "Execute" on the confirmation screen to begin.)
To load planning metadata from the SxS memory card in slot
A.
Selecting "Execute" displays the list of the planning metadata
files stored on the SxS memory card in slot A. Specify a file,
select "Load" then "Execute" for loading.
To load planning metadata from the SxS memory card in slot
B.
Selecting "Execute" displays the list of the planning metadata
files stored on the SxS memory card in slot B. Specify a file,
select "Load" then "Execute" for loading.
Select "Execute" to display the detailed information of the
planning metadata loaded in the camcorder.
Select "Execute" to clear the planning metadata loaded in the
camcorder.
Select the display mode of the clip name specified in planning
metadata.
Title1 (ASCII): Clip name in ASCII format
Title2 (UTF-8): Clip name in UTF-8 format
Off: To not display the clip name
Select whether to acquire the IP address automatically from a
DHCP server (Enable) or not (Disable).
Set the IP address when "DHCP" is set to "Disable."
Set the subnet mask when "DHCP" is set to "Disable."
Set the default gateway when "DHCP" is set to "Disable."
Set a desired user name in 1 to 31 alphanumeric characters.
Sets a password in 0 to 31 alphanumeric characters.
Note
The password is displayed as " * ".
Confirms the "Network"settings.
Select "Execute" to confirm.
Display the MAC address.
Reset the "Network" settings to the preset values.
Select "Execute" to reset.
Setup Menu List 129