System Components; Adding Or Replacing Memory - Gateway E1400 System Manual

System
Components

Adding or replacing memory

The Synchronous Dynamic Random Access Memory (SDRAM) Dual Inline
Memory Modules (DIMMs) supported by your system board conform to the
following standards:
16 MB, 32 MB, 64 MB, 128 MB, and 256 MB


Non-ECC (64-bit) memory


Single- or double-sided configurations


512 MB maximum system memory


The system board contains two DIMM sockets. You can fill the sockets with
16-MB, 32-MB, 64-MB, 128-MB, or 256-MB DIMMs in any combination to
expand the SDRAM up to 512 MB.
If your processor has a 66-MHz front side bus (FSB), you can use 66-MHz or
100-MHz SDRAM. If your processor has a 100-MHz FSB, you should use only
100-MHz SDRAM.
No jumper settings are required for the memory size or type because the BIOS
automatically detects this information.
Adding or replacing memory
5
45