Xm Weather (Optional); Displaying Metar And Taf Information On The; Airport Information Page - Garmin G1000 Cockpit Reference Manual

2. Press the VIEW softkey. The 360 and ARC soft-
keys are displayed. Press the 360 softkey to
display a 360˚ viewing are or press the ARC
softkey to display a 120˚ viewing area.
Press the CLEAR softkey to remove all Storm-
scope lightning data from the display.

10.3 XM WEATHER (OPTIONAL)

WARNING: Use of XM weather for hazard-
ous weather penetration is not recommended.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1. Press the MAP softkey.
Press the NEXRAD or XM LTNG softkey to dis-
2.
play the desired weather. Press the applicable
softkey again to remove weather data from the
Navigation Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R

Displaying METAR and TAF information on the

Airport Information Page

To display METAR and TAF text on the Air-
port Information Page:
Turn the large FMS knob to select the WPT Page
1.
Group.
2. Turn the small FMS knob to select the Airport
Information Page.
Press the WX softkey to display METAR and TAF
3.
text (METAR and TAF information is updated
every 12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
SECTION 10 – HAZARD
AVOIDANCE
METAR
Text
TAF
Text
WX
Softkey
10-3