Maintenance And Troubleshooting; Controls Troubleshooting; Handgrip Pulse Sensor Troubleshooting - ProForm 650 User Manual

MAINTENANCE AND TROUBLESHOOTmNG
inspect and properUy tighten aH parts of the eHiptbaU
exerciser reguUarUy, R epUace any worn parts immedi-
ateUy,
The eHiptbaU exerciser can be wiped dean with a soft
cbth and mild detergent, Do not use abrasives or
solvents. To prevent damage to the consob, keep
Hquids away from the consob and keep the consob
out of direct sunlight,
When storing the eHiptbaU exerciser, remove the bat-
teries from the consob, Keep the eHiptbaU exerciser in
a dean, dry bcation, away from moisture and dust,
CONSOLE TROUBLESHOOTING
if the console does not function properly, the batteries
should be replaced, To replace the batteries, see
assembly steps 3 and 4 on pages 5 and 6,
HANDGRIP PULSE SENSOR TROUBLESHOOTING
if the handgrip pulse sensor does not function proper°
ly, see step 5 on page 9,
11