Table of Contents
Related Manuals for Furman PST-8
Summary of Contents for Furman PST-8
- Page 1 PST-8 Owners Manual...
- Page 2 At best, these irregularities can degrade your equipment’s performance; at worst, they can severely damage individual components or your entire system. Not so with Furman. With our exclusive virtually Maintenance-Free SMP+ circuitry and automatic over-voltage shutdown, the Power Station-8 assures years of trouble free service with no damaged components, no service calls, and no down time.
- Page 3 enclosure. Do not remove the covers. There are no user serviceable parts inside. Refer servicing to qualifi ed personnel only. Important Safety Instructions 1. Please read and observe all safety and operating instructions before installing your Power Station-8 (PST-8). Retain these instructions for future reference.
- Page 4 7. Your PST-8 should be serviced by qualifi ed service personnel when: • The power supply cord or the plug has been frayed, kinked, or cut. • Objects have fallen or liquid has spilled into the unit. • The unit has been exposed to rain or other moisture. •...
- Page 5 If the telephone, cable or satellite signal will no longer pass through our protector, please send your Power Station to Furman for servicing. To test this, simply disconnect the incoming and out going cable from the PST-8. Connect the incoming connector to the component that formerly received the out going connector, thus by-passing the in-line protection.
- Page 6 Furman service. Indicators Extreme Voltage Shutdown Indicator: Furman’s SMP+ circuit senses sustained voltages that are high enough to cause damage to your components, and shuts the power down before damage can occur. Such conditions can include accidental connection to a 240VAC source (where 120VAC is expected), or an open neutral from a 208 or 240VAC source.
- Page 7 “Protection OK” LED indicator will turn off. If this happens, some level of protection from voltage surges will remain, but Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service Center for repair. Mounting...
- Page 8 Furman in writing of the claimed defects. If the defects are of such type and nature as to be covered by this warranty, Furman shall authorize the purchaser to return the product to the Furman factory or to an authorized Furman repair location.
- Page 9 Connected Equipment Warranty period is also reduced to one year from the date of purchase. All warranties contained herein are null and void if: the Furman Surge Protector in use during the occurrence is not provided to Furman for inspection upon Furman’s...
- Page 10 Furman, or against damages resulting from such non-Furman made products or components. This warranty shall be cancelable by Furman at its sole discretion if the product is modifi ed in any way without written authorization from Furman. This warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Furman.
- Page 11 Furman with respect to the product. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect. Warranty claims should be accompanied by a copy of the original purchase invoice showing the date of purchase (if a Warranty Registration Card was mailed in at the time of purchase or if the product was registered on-line, this is not necessary).
- Page 12 Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.FurmanSound.com E-mail: info@furmansound.com 110304-C...