Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual page 89

TeamPoS 3000 XL and XL
7. Place the LCD face down on a clean dry surface. Remove the back cover by pressing in
where indicated by symbol. Note the screws required to attach the LCD are taped to the
inside of this cover.
Press Here and Lift
8. Attach the cables to the connectors on the LCD. Connector labels are etched into the
plastic casing of the LCD monitor.
D900000145
2
Back of LCD
A to B USB for opt.
MSR or Keypad MSR
DVI
Notches for lower hinge cover
Mounting Screws
Panhead, Phillips
M3x0.5 x 8mm
9.
LCD Power for opt.
Audio
power brick
pUSB
Issue 3
Installation
Back Cover
Touch Panel 1-2
Switch
VGA
5-43