Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual page 88

TeamPoS 3000 XL and XL
4. Thread the cables through the stand beginning with the larger cables first. Video cable
(either DVI or VGA) and powered USB are required. Audio cable and A-to-B USB
cable (for MSR or keypad/MSR) are optional. See cable configurations below.
VGA Cable
Powered USB
Audio Cable
A-to-B Cable
( ti l)
DVI Cable
DVI Cable Configuration
with optional Audio & A-to-B Cables
DVI USB
5. Use DVI or VGA, not both. Bend DVI (or VGA) 90° towards the outside of the bracket
(before the bridge) and then 90° again towards the LCD mount. Powered USB, audio
(optional), and A-to-B USB (optional) need to be threaded under the bridge.
6. Rotate the monitor stand as needed so that you can reach the cables as they are threaded
through the stand.
D900000145
2
Under the
bridge
Through the
tunnel
Audio pUSB
VGA
Powered USB
Audio Cable
A-to-B Cable
DVI Cable
Issue 3
Under the
base
VGA Cable Configuration
with optional Audio & A-to-B Cables
VGA USB
Under the
base
Through the
tunnel
Under the
bridge
Installation
Audio pUSB
5-42