Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual page 108

TeamPoS 3000 XL and XL
function doesn't does not work properly, because it uses the signal at the
edges of the screen. In case when adjusted improperly, adjust the Clock,
H.Position, V.Position, or Phase from LCD Adjustment Menu in the OSD
menu manually.
c. When Configuring the OSD menu, the display has to be powered on and be
input valid signal, with showing Green.
(2) Usages
Basic Usage
a. Press the "MENU" button to pop up the OSD menu
b. Choose the items by pressing the "/-"or "/+"button and then press
"AUTO/SELECT" button.
c. Adjust the value of the items by pressing the "/-"or "/+"button.
d. Select Exit from the menu or, leave it for 30 seconds, and then the OSD
menu will be closed. (Time out can be configured by OSD Time out menu.)
Disabling / Enabling OSD menu - In order to prevent unintentional manipulation, OSD Menu
can be disabled.
a. Disable the OSD menu - When the OSD menu is enabled, press and hold the
"/-"and "MENU" key simultaneously for 4 seconds, and then with
showing message "OSD Locked" all front buttons. (except Power button)
will be disabled.
b. Enable the OSD menu - When the OSD menu is diabled, press and hold the
"/- "and "MENU" key simultaneously for 4 seconds, and then with
showing message "OSD Unlocked", all front buttons(except Power button)
will be disabled.
D900000145
2
Issue 3
Installation
5-62