Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual page 82

TeamPoS 3000 XL and XL
11. Connect the wide ribbon cable on the COM board to the ribbon socket on the Combo
board
12. Flip combo board and attach it to the top opening of the chassis of the backplane
assembly by sliding it down into the notches on the chassis. Secure board with the 2
mounting screws.
13. Make sure that the cables do not interfere with the motherboard. Bend and fold the
ribbon cables as needed to clear the motherboard.
D900000145
2
Issue 3
Installation
Ribbon Cable for
Com Board
Connects to
Combo Board
5-36
Mounting
Screws