Single Stacked Lcd Stand - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL
5.14.1.

Single Stacked LCD Stand

Single Stacked LCD Stand
1. Remove only the hinge cap and cable access cover from the stand; leave the top and
bottom hinge cover in place. Some photos in this section show the top and bottom hinge
cover and cover removed in order to more clearly show the cable route; however,
assembly is easier if the bottom hinge cover and top hinge cover are left in place.
2. Remove the cable access cover by pressing from
the underside. The cable access cover should pop
out easily.
3. To remove the hinge cap, grasp it firmly as shown in the
photo and pull back using your thumbs.
D900000145
2
Issue 3
Installation
Lower Hinge
Cover
Hinge Cap
Cable Access
Lower Hinge
Cover
Top Hinge
Cover
Cover
Top Hinge
Cover
5-41