Figure 9.5 Image of L2 Switches to Add
1.
Design additional configurations. (Network device administrator)
2.
Provide the additional network device information to the infrastructure administrator. (Network device administrator)
Add a network device in the state where the following operations have been completed.
-
Initial configuration
-
Operation test
-
Integration of the device into a physical network configuration
3.
Register the resources of the server.
It is necessary to register chassis or LAN switch blades for a blade server.
4.
Create network configuration information (XML definition) using the acquired network device information.
5.
Register an additional L2 switch as a network device.
Use the rcxadm netdevice create command to register as a network device.
- 69 -