Installing Odd In 5.25-Inch Chassis Bay; Required Tools; Preliminary Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

7.13

Installing ODD in 5.25-inch chassis bay

7.13.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing ODD: tool-less
●

7.13.2 Preliminary steps

Before installing an ODD, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Follow all procedures described in section
Ê Locate the correct drive bay as described in section
page 82.
Ê Remove the dummy cover as described in section
dummy cover" on page
MX130 S2
59.
112.
Upgrade and Maintenance Manual
HDDs and accessible drives
"Disabling BitLocker
"Opening the server" on page
"Mounting order" on
"Removing 5.25-inch
48.
115