HDDs and accessible drives
7.14
Removing ODD out of 5.25-inch chassis
bay
7.14.1 Required tools
Preliminary and concluding steps: tool-less
●
Installing an ODD: tool-less
●
7.14.2 Preliminary steps
Before removing an ODD, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove all backup and optical disk media from backup and optical disk
drives as described in section
page
60.
Ê Follow all procedures described in section
Ê Open the front cage as described in section
page
52.
Ê Locate the correct drive bay as described in section
page
82.
118
59.
"Removing backup and optical disk media" on
Upgrade and Maintenance Manual
"Disabling BitLocker
"Opening the server" on page
"Opening the front cage" on
"Mounting order" on
48.
MX130 S2