HDDs and accessible drives
7.20
Replacing slimline ODD out of slimline
chassis bay
7.20.1 Required tools
Preliminary and concluding steps:
●
Removing accessible drives: tool-less
●
7.20.2 Preliminary steps
Before replacing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove all backup and optical disk media from backup and optical disk
drives as described in section
page
60.
Ê Follow all procedures described in section
Ê Open the front cage as described in section
page
52.
142
59.
"Removing backup and optical disk media" on
Upgrade and Maintenance Manual
"Disabling BitLocker
"Opening the server" on page
"Opening the front cage" on
48.
MX130 S2