The Displays; Sonar Display - Navman Fish 4432 Installation And Operation Manual

5 The Displays

Press DISP to show the Display menu. Use or
to select display tab, then select a particular
display using the or
The Display menu

5-1 Sonar display

Data header, set up to show the
boat speed, sonar status etc.
Depth (medium size digits)
To show the Sonar display, press
DISP and select Sonar Tab,
select Sonar and press ENT.
This display scrolls from right
(most recent echoes) to left
(oldest echoes) at the selected
frequency (see section 3-2 Setup
> Sonar).
To change items, press MENU until the
Options menu is shown.
FISH 4432/4433 Installation and Operation Manual
cursor keys.
Note: Refer to Section 3-2 Setup > Sonar, for information about
customizing features on the sonar displays.
Sonar display at a single or mixed frequency (section 5-1)
Sonar split display with zoomed section (section 5-2)
Show zoomed section of sonar
Sonar flat bottom trace in zoomed section (section 5-3)
Sonar split display with 83 and 200 frequencies (section 5-4)
Sonar split display with echo strength (section 5-5)
Show perspective view of sonar (section 5-6)
Fuel data (section 5-7)
Water temperature and depth history and boat data (section 5-8)
Product and wiring information (section 5-9)
Gain is explained in
section 4-4 Gain.
Range is explained
in section 4-5 Range.
A-scope is
explained in section
5-5 Sonar A-Scope
display.
The Display menu is summarized here and each
display is shown in the following sections.
Most displays have an Options menu so that
relevant features can be changed quickly.
Data header
The data header can
be selected on or off.
When selected, it
is a customizable
feature that can be
used to display up
to 9 data items, such
as alarms or water
temperature.
NAVMAN
Surface
Fish symbols with depth
Bottom
Range
24