Appendix A - Specifications - Navman Fish 4432 Installation And Operation Manual

Appendix A - Specifications

Specifications
Display type:
Display size:
Supply voltage:
Supply current at 13.8 V:
Operating temperature:
Environment:
Standards Compliance EMC:
Depth:
Output power:
Dual Transducer frequency:
Receiver sensitivity:
Typical depth acquisition time
from startup:
Transom transducer cable
length:
Temperature measurement
range:
Speed range:
Communications:
NMEA Output:
NMEA (0183) is a standard for
interfacing marine electronic
devices. The Navman
fishfinder can output the
following sentences
Fuel Computer:*
(optional fuel transducer(s)
required)
*4433 only
SmartCraft Support:
FISH 4432/4433 Installation and Operation Manual
FISH 4432
16 Greyscales
Screen Resolution 360 high x 240 wide(pixels)
White LED backlighting
4.3" (110mm) diagonal
10 to 16V DC
170 mA min - no backlighting
250 mA max - full backlighting
32° to 122°F (0° to 50°C)
IPx6 and IPx7
USA FCC Part 15 Class B
Europe (CE) EN60945 (EMC only)
New Zealand and Australia (C-Tick) CISPR 22
2 ft (0.6 m) to 750ft with supplied transducer.
Depth capabilities of transducer used and installation and water clarity.
Variable, up to 250W RMS
200 kHz / 83 kHz
Better than 10 micro volts RMS
Dynamic range 4.0 million to 1 (120 dB)
2 seconds at 100 ft (30 m)
33 ft (10 m)
32° to 99.9°F (0° to 37.7°C) Resolution of 0.1° unit
Outboard carbureted two stroke and EFI petrol/gasoline
engines: 30 to 300 hp
Outboard four stroke petrol/gasoline engines: 90 to 300 hp
Inboard petrol/gasoline engines: 50 to 300 hp
Minimum flow rate: 1.3 U.S. gallons per hour (5 litres per hour)
Maximum flow rate: 34 U.S. gallons per hour (130 litres per hour)
No
NAVMAN
FISH 4433
26 ft (8 m)
1 to 50 kn (57.5 mph, 96.6 kph)
NMEA 0183 (Ver 2.0) 4800 baud
NavBus
DBT (Depth Below Transducer)
DPT (Depth and Keel offset)
VHW (Speed)
VLW (Distance traveled – Total & Trip)
MTW (Sea Water temperature)
XDR (Battery voltage and fuel flow)
Yes, single engine
34