The Displays; Sonar Display - Navman FISH 4500/4600 Installation And Operation Manual

5 The Displays

Press DISP to show the Display menu. Use or
to select display tab, then select a particular
display using the
The Display menu

5-1 Sonar display

Data header, set up to show the
boat speed, water temp etc.
Depth (medium size digits)
Color bar
To show the Sonar display, press
DISP and select Sonar Tab, se-
lect Sonar and press ENT.
This display scrolls from right
(most recent echoes) to left
(oldest echoes) at the selected
frequency (see section 3-2 Setup
> Sonar).
To change items, press MENU until the Options
menu is shown.
22
or cursor keys.
Note: Refer to Section 3-2 Setup > Sonar, for information about
customizing features on the sonar displays.
Sonar display at a single or mixed frequency (section 5-1)
Sonar split display with zoomed section (section 5-2)
Sonar flat bottom trace in zoomed section (section 5-3)
Sonar split display with 50 and 200 frequencies (section 5-4)
Sonar split display with echo strength (section 5-5)
Fuel data (section 5-6)
Water temperature and depth history and boat data (section 5-7)
Product and wiring information (section 5-8)
Gain is explained in
section 4-4 Gain.
Range is explained in
section 4-5 Range.
A-scope is explained
in section 5-5 Sonar
A-Scope display.
The Display menu is summarized here and each
display is shown in the following sections.
Most displays have an Options menu so that
relevant features can be changed quickly.
Data header
The data header can be selected on or off.
When selected, it is a customizable feature that
can be used to display up to 12 data items,
NAVMAN FISH 4500/4600 Installation and Operation Manual
Surface
Depth line
Fish symbols with depth
Bottom
Range
such as boat speed
or fuel used.