Range; The Displays - Navman Fish 4350 Installation And Operation Manual

4-4 Range

Range is the vertical depth displayed on the
FISH 4350 and FISH 4380.
The Navman Þ shÞ nder has two range modes,
Auto Range and Manual Range:
In Auto Range, the Þ shÞ nder adjusts
•
the depth range automatically so the
bottom is always shown in the lower part
of the display. The use of Auto Range is
recommended for normal conditions.
In Manual Range, the Þ shÞ nder shows only
•
a selected depth range. In areas of rapidly
changing bottom depth, such as the sea
ß oor around pinnacles, it can be useful
to prevent the display from rescaling to
always show the bottom. If the bottom is
deeper than the speciÞ ed depth range, it
will not be shown on the display.

5 The Displays

Press MENU once to show the Display menu,
then select a particular display using the
cursor keys then press to conÞ rm. (Section
2 Basic Operation, describes how to use the
keys in more detail.)
The Display menu
Split Ratio
Use this to change the split ratio between the zoom and the sonar history sections displayed. The
default split ratio is 50%.
1. Highlight Split Ratio and press .
A left arrow and right arrow appear on either side of the divider line.
2. Use the or cursor keys to adjust
Hint: Press to return to the last sonar display used. Press MENU then to return to the previously
selected display. Use this to switch between two frequently used displays.
Refer to Section 3-2 Setup > Sonar, for information about customizing features on the sonar
displays.
18
Changing the Range Mode
To change between Auto Range and Manual
Range, hold the + or -. The Range mode is
displayed at the bottom of the screen.
Press the + or - key to change to increase
or decrease the range to the desired depth.
Values can be set between 10 ft (3 m) to 600
ft (180 m).
Zoom Range and Zoom Offset
On the Sonar Zoom and Sonar Bottom displays,
a vertical bar is shown on the far right of the
display. This is the zoom bar. The zoom bar
shows the zoom range; that is, the area that
is magniÞ ed.
Use the
zoom range.
Use the
zoom offset.
The Display menu is summarized here
and each display is shown in the following
or
sections.
Most displays have an Options menu so that
relevant features can be changed quickly.
Full screen display of Sonar history (section 5-1)
Split display with Sonar and zoomed section (section 5-2)
Bottom trace displayed as ß at line in zoomed section (section 5-3)
Split display with Sonar and echo strength (section 5-4)
Fuel data (section 5-5)
Water temperature, depth history and other boat data (section 5-6)
See below.
NAVMAN
or cursor keys to adjust the
or cursor keys to adjust the
FISH 4350 / 4380 Installation and Operation Manual