Configuration The Ibp Module; Overview - Fujitsu PRIMERGY BX600 User Interface Description

Overview

Configuration the IBP Module

5 Configuration the IBP Module
This section contains information about IBP unpacking, installation, and cable connections.
5.1 Overview
The IBP Module is inserted in the PRIMERGY BX600 Blade Server which is a modular server
system that can integrates up to 10 processor blades and four IBP Modules.
Package Contents
While unpacking the IBP Module, ensure that the following items are included:
• The IBP Module
• Documentation CD
Unpacking the IBP Module
To unpack the IBP Module:
NOTE: Before unpacking the IBP Module, inspect the package and report any evidence of
damage immediately.
NOTE: An ESD strap is not provided, however it is recommended to wear one for the following
procedure.
1 Open the container.
2 Carefully remove the IBP Module from the container and place it on a secure and clean
surface.
3 Remove all packing material.
4 Inspect the IBP Module for damage. Report any damage immediately.
NOTE: The illustrations in this document might differ slightly from actual Blade Panel and
chassis.
33
Intelligent Blade Panel Module