Fujitsu PRIMERGY BX600 User Interface Description page 192

Management Commands
This command sets a client IP mask for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP address value to
denote a range of IP addresses from which SNMP clients may use that community to access
the device. A value of 255.255.255.255 will allow access from only one station, and will use
that machine's IP address for the client IP Address. A value of 0.0.0.0 will allow access from
any IP address. The name is the applicable community name.
Syntax
snmp-server community ipmask <ipmask> <name>
no snmp-server community ipmask <name>
<name> - community name.
<ipmask> - a client IP mask.
no - This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is
the applicable community name. The community name may be up to 16 alphanumeric
characters.
Default Setting
0.0.0.0
Command Mode
Global Config
This command restricts access to IBP information. The access mode is read-only (also called
public) or read/write (also called private).
Syntax
snmp-server community {ro | rw} <name>
<name> - community name.
<ro> - access mode is read-only.
<rw> - access mode is read/write.
Default Setting
None
191
Command Reference
Intelligent Blade Panel Module