Traceroute - Fujitsu PRIMERGY BX600 User Interface Description

System Utilities
Ping on changing parameter value
Syntax
ping <host> count <0-20000000> [size <32-512>]
ping <host> size <32-512> [count <0-20000000>]
<ipaddr> - an IP address.
<0-20000000> - number of pings (Range: 0 - 20000000). Note that 0 means infinite.
<size> - packet size (Range: 32 - 512).
Default Setting
Count = 5
Size = 32
Command Mode
Privileged Exec

7.11.8 traceroute

This command is used to discover the routes that packets actually take when traveling to their
destination through the network on a hop-by-hop basis. <ipaddr> should be a valid IP address.
[port] should be a valid decimal integer in the range of 0(zero) to 65535. The default value is
33434. The optional port parameter is the UDP port used as the destination of packets sent as
part of the traceroute. This port should be an unused port on the destination system.
Syntax
traceroute <host> [hops <1-255> [waittime <1-255>]]
traceroute <host> [waittime <1-255> [hops <1-255>]]
<host> - A host name or an IP address.
<1-255> - Time to wait for a response to a probe, in seconds.
<1-255> - The maximum time to live used in outgoing probe packets.
Default Setting
None
Command Mode
269
Command Reference
Intelligent Blade Panel Module