Fujitsu PRIMERGY BX600 User Interface Description page 78

Panel Settings Menu
Web-Based Management Interface
Viewing SNTP Global Status Page
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may
be supported by a client.
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated
the system clock.
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or
receipt of an unsolicited message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited
message for both unicast and broadcast modes. If no message has been received from a
server, a status of Other is displayed. These values are appropriate for all operational
modes.
•
Other None of the following enumeration values.
•
SuccessThe SNTP operation was successful and the system time was
updated.
•
Request Timed Out A directed SNTP request timed out without receiving a
response from the SNTP server.
• Bad Date Encoded The time provided by the SNTP server is not valid.
• Version Not Supported TheSNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsychronized The SNTP server is not synchronized with its peers.
This is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a message
received from a server.
Server IP Address - Specifies the IP address of the server for the last received valid
packet. If no message has been received from any server, an empty string is shown.
77
Intelligent Blade Panel Module