Ricoh MP 2501SP User Manual page 176

10. Troubleshooting
Message
"Check whether there are
any network problems."
[16-00]
"Connection with LDAP
server has failed. Check the
server status."
"Error occurred, and
transmission was cancelled."
"Exceeded max. number to
display. Max. No.: n"
(A figure is placed at n.)
174
Causes
• No IP address has
been registered.
• A network is not
connected properly.
A network error has
occurred and connection
has failed.
• Original jammed
during Immediate
Transmission.
• A problem occurred in
the machine, or noise
occurred on the
telephone line.
The number of search results
has exceeded the maximum
number of items that can be
displayed.
Solutions
• Check that the correct IP address
is specified for the machine in
[System Settings]. For details
about IP address, see "Interface
Settings", Connecting the
Machine/ System Settings
• For details about network
problems, contact your
administrator.
• Try the operation again. If the
message is still shown, the
network may be busy.
• Check the settings for LDAP server
in [System Settings]. For details
about settings for LDAP server,
see "Programming the LDAP
server", Connecting the
Machine/ System Settings
Press [Exit], and then send the
documents again.
Search again after changing the
search conditions.
.
.