Loading An Expansion Voice Bank (Library) To The Tyros3-Library Load - Yamaha Tyros3 Reference Manual

Loading an Expansion Voice Bank (Library) to the Tyros3—Library Load
This operation lets you recall the Custom Voices you've saved to a Library file (in Library Save on
them to the Tyros3.
1
Call up the operation display.
[VOICE CREATOR] → [A] LIBRARY LOAD
2
Use the TAB [
the desired Library file.
3
By using the [A]–[J] buttons, select the desired Library file.
1
If the instrument does not contain Library files, the selected file is automatically
1
loaded. If the instrument contains Library files, a message appears prompting
you to overwrite existing Voices.
YES
YES ALL
NO
CANCEL
After the loading is finished, you can select the newly loaded Voices from the
[EXPANSION] button.
28 • Tyros3 Reference Manual
Q Q Q Q ][ W W W W ] buttons to select the location or device containing
The current Custom Voice displayed in the prompt is replaced with the one in
the Library file.
Current Custom Voices are replaced with all of the Voices in the Library file.
You can use this after replacing some selected Voices one by one by using
"YES" and replace all the rest.
The displayed Voice in the prompt will not be replaced.
Cancels loading the Library file.
page 26), and load
NOTE
File loading may take several minutes,
depending on how many Voices are in
the Library and how much data they
contain. Do not turn off the power or
disconnect any devices during this
operation.
NOTE
While loading, pressing the [VOICE
CREATOR] or [EXPANSION] button
calls up the progress display.