Editing An Expansion Voice Bank-Library Edit - Yamaha Tyros3 Reference Manual

8
Repeat steps 5–7 to edit each key.
9
Press the [8 ▲▼] (VOICE SET) button and edit the Voice Set parame-
ters (page
After you finish editing the Voice Set parameters, press the [EXIT] button to
show the DRUM MAPPING display again.
10
Press the [J] (SAVE) button to call up the SAVE & ASSIGN display
Save the created Drum Voice as a file, then assign it to the Expansion Voice
Bank. For details, refer to steps 13–14 on
Editing an Expansion Voice Bank—Library Edit
1
1
This function lets you organize the Voices in the Expansion Voice bank, renaming them, changing their location
within in the bank, or even deleting them if desired.
1
Call up the operation display.
[VOICE CREATOR] → [B] LIBRARY EDIT
2
Use the TAB [
Voice, Custom Drum or Premium.
3
Select the desired Voice in the display and use the [1 ▼]–[5 ▼] but-
tons to edit the selected Voice.
3
Reloading an Expansion Voice Bank
The [8 ▲] (RELOAD) button is used when the links of the Voices are broken
(an exclamation mark "!" is shown on the Voice icon). For example, when
you open this display without connecting the USB storage device which
contains the assigned Custom Voice, a "Not Found!" message appears
along with the Voice name. If this happens, connect the appropriate USB
storage device and reload the Expansion Voice bank.
While reloading, press the [VOICE CREATOR] or [EXPANSION] button calls
up the progress display.
4
When you've finished editing, press the [EXIT] button.
24 • Tyros3 Reference Manual
12).
Q Q Q Q ][ W W W W ] buttons to select the desired tab page: Custom
page 20.
See below.
Shows the property display
(page 25).
NOTE
The Premium page is reserved for
Voices obtained from the Internet
website. The Voices in the Premium
page cannot be edited but only deleted.
NOTE
When you reorganize Voices in this dis-
play, you are simply organizing the
paths of the Voices, not copying or
moving the Voices themselves.