Setting The Bass Note For Style Playback Via Midi Receive; Setting The Chord Type For Style Playback Via Midi Receive - Yamaha Tyros3 Reference Manual

Setting the Bass Note for Style Playback via MIDI Receive

The explanations here apply to the BASS Page in step 4 on
note for Style playback, based on the note messages received via MIDI. The note on/off messages received at the
channel(s) set to "ON" are recognized as the bass note of the chord of Style playback. The bass note will be
detected regardless of the [ACMP] or split point settings. When several channels are simultaneously set to "ON,"
the bass note is detected from merged MIDI data received over the channels.
1
1
Use the [A]/[B] buttons to select the channel.
2
Use the [1 ▲▼]–[8 ▲▼] button to set the desired channel to ON or
OFF.
You can also set all channels to OFF by pressing the [I] (ALL OFF) button.

Setting the Chord Type for Style Playback via MIDI Receive

The explanations here apply to the CHORD DETECT Page in step 4 on
the chord type for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to "ON" are recognized as the notes for detecting chords in Style playback. The
chords to be detected depend on the fingering type. The chord types will be detected regardless of the [ACMP] or
split point settings. When several channels are simultaneously set to "ON," the chord type is detected from merged
MIDI data received over the channels.
The operation procedure is basically the same as that of the BASS display above.
2
page 112. These settings let you determine the bass
page 112. These settings let you determine
Tyros3 Reference Manual • 117
10
10