User Voice Bank And Number - Yamaha DTX900M Owner's Manual

Reference
Sampling Mode [SAMPLING]
10: Copy
This Job lets you copy the data of one User Voice to
another.
1
2
1 User Voice bank and number as Source
B User Voice bank and number as Destination
Determines the User Voice banks and numbers as source and
destination.
NOTICE
• This operation overwrites any data previously existing at the desti-
nation User Voice number.
11: Delete
This Job lets you delete a specific User Voice from mem-
ory.
1

1 User Voice bank and number

Determines the User Voice bank and number to be deleted.
12: Delete All
This Job lets you delete all User Voices. After calling up
this display, press the [ENTER/STORE] button to delete all
User Voices.
146
DTX900 Owner's Manual
13: Extract
This Job lets you delete from memory all unnecessary
audio data included in the User Voice (located ahead of the
Start Point and located after the End Point), leaving only
the portion of the sample you wish to keep.
1
1 User Voice bank and number
Determines the User Voice bank and number of which the
unnecessary portion is to be extracted.
14: Optimize Memory
This Job optimizes the memory (DIMM) for Sampling.
Optimization consolidates areas of used and unused (avail-
able) memory to create the largest possible area of contigu-
ous available memory. In some cases, the amount of
remaining memory will be increased when you execute the
Optimize Memory Job.
After calling up this display, press the [ENTER/STORE]
button to execute the Optimize Memory Job.