Config2 - Yamaha Tyros3 Reference Manual

CONFIG2

Select the desired parameter:
1 Speaker/AUX Out- Loop
Send.
2 Voice Category Button
Options/Display-related
Settings
● 1 Speaker/AUX Out-Loop Send
[3 ▲▼]/
[4 ▲▼]
[5 ▲▼]/
[6 ▲▼]
● 2 Voice Category Button Options/Display-related settings
[1 ▲▼]/
[2 ▲▼]
[3 ▲▼]/
[4 ▲▼]
[5 ▲▼]/
11
11
[6 ▲▼]
[7 ▲▼]/
[8 ▲▼]
122 • Tyros3 Reference Manual
SPEAKER Determines whether or not the optionally installed speaker will sound.
HEADPHONE SW: Speaker sounds normally, but is cut off when headphones
are inserted to the PHONES jack.
ON: Speaker sound is always on.
OFF: Speaker sound is off.
AUX OUT/LOOP Selects the desired output type corresponding to the AUX OUT/LOOP SEND
SEND jack.
Voice Category Determines how the Voice Selection display is opened when one of the VOICE
Button Options buttons is pressed.
OPEN & SELECT: Opens the Voice Selection display with the top (first) Voice
of the Voice category automatically selected (when one of the VOICE but-
tons is pressed).
OPEN ONLY: Opens the Voice Selection display with the currently selected
Voice (when one of the VOICE buttons is pressed).
Display Voice Determines whether or not the Voice bank and number are shown in the
Number Voice Selection display. This is useful when you want to check which bank
select MSB/LSB values and program change number you need to specify
when selecting the Voice from an external MIDI device.
For the GS Voices, the Display Voice Number is not available (the program change numbers
are not shown).
Display Style Selects whether the default tempo of each Style is displayed above the Style
Tempo name or not in the Style Selection display.
Popup Display Determines the time in which the pop-up windows close. (Pop-up windows
Time are displayed when you press buttons such as TEMPO, TRANSPOSE or UPPER
OCTAVE, etc.)
NOTE