Config2 - Yamaha Clavinova CVP-601 Reference Manual

CONFIG2

Call up the operation display.
[FUNCTION] – [UTILITY] TAB [ ][ ] CONFIG 2
1 Speaker-related settings
[2]/
[3]
[4]
11
[5]
[6]/
[7]
90 CVP-601 Reference Manual
Select the desired parameter:
1 Speaker
2 Voice Category Button
Options/Display-related Set-
tings
SPEAKER Determines whether or not the speaker will sound.
HEADPHONE SW
Speaker sounds normally, but is cut off when headphones are inserted to
the PHONES jack.
ON:
Speaker sound is always on.
OFF:
Speaker sound is off. You can only hear the instrument sound via the
headphones.
I.A. CONTROL I.A. Control (Intelligent Acoustic Control) is a function which automati-
ON/OFF cally adjusts and controls the sound quality according to the overall vol-
ume of the instrument. Even when the volume is low, it permits both low
sounds and high sounds to be clearly heard. I.A. Control is effective only
from the sound output of the instrument speakers.
I.A. CONTROL This sets the depth of the I.A. Control. The higher the value, the more
DEPTH clearly that low and high sounds are heard at lower volume levels.
AUX IN NOISE This effect mutes the input signal when the input from the AUX IN falls
GATE below a specified level.