Bass Note Settings For Style Playback Via Midi Receive; Chord Type Settings For Style Playback Via Midi Receive - Yamaha DGX-670 Reference Manual

Bass Note Settings for Style Playback via MIDI Receive

The explanations here apply to the On Bass Note page in step 4 on
the bass note for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to On are recognized as the bass note of the chord of Style playback. The bass
note will be detected regardless of the [ACMP] button or split point settings. When several channels are
simultaneously set to On, the bass note is detected from merged MIDI data received over the channels.
1
Use the Cursor buttons [][] to select the target.
2
Use the [1 ]–[8 ] buttons to set the desired channel to On or Off.

Chord Type Settings for Style Playback via MIDI Receive

The explanations here apply to the Chord Detect page in step 4 on
MIDI channels over which the MIDI data from the external device will be used to detect the Chord Type for
Style playback. The note on/off messages received at the channel(s) set to On are recognized as the notes for
detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord types
will be detected regardless of the [ACMP] button or split point settings. When several channels are
simultaneously set to On, the chord type is detected from merged MIDI data received over the channels.
9
The operation procedure is basically the same as that of the On Bass Note page above.
84
DGX-670 Reference Manual
1
2
page 79. These settings let you determine
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
If WLAN is shown, this instrument can handle
MIDI messages received via the USB wireless
LAN adaptor connected to the [USB TO DEVICE]
terminal. When WLAN is not shown although the
USB wireless LAN adaptor is connected, turn the
instrument off then on again.
page 79. This page lets you select the