2.6 Setting the From Address
2.6 Setting the From Address
You can carry out the following steps to specify the mail address that appears
in the sender (From) line of the mail transmitted by Scan to E-mail.
1.
Show the setup screen from the controller operation panel.
2.
Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
[Fiery Email User Name]:
[Fiery Email Domain Name]:
Note
• The From address is Fiery Email User Name@Fiery Email Domain
Name. Normally, the e-mail address of the controller is specified.
2-14
Specify the mail user name of the sender.
Specify the mail server domain name to which the
sender belongs.