Scan Mode Tab - Kyocera KM-C3130 User Manual

2.3 Setup Items for Scanning

2.3.3 Scan Mode Tab

You can specify the transmission method of the document.
[Color/File]:
Settings
Color mode
File Format
Note
• If the transmission destination is set to a mailbox, the file format is
specified when the data is downloaded from the mailbox to the
computer. You do not have to set the format using [File Format] on
this screen.
[Resolution]:
Settings
[Background Remove]:
Background Remove Enter settings concerning background remove.
Settings
[Scan Size]:
2-10
Specifies the color mode, data format.
: Full Color, Grayscale, or Monochrome
: PDF, TIFF, or JPEG
Specifies the resolution.
200 dpi, 300 dpi, 400 dpi, 600 dpi
Enter settings concerning background remove and
document brightness.
Auto or manual (-5 (maximum removal) to
+2 (minimum removal): 8 levels)
Specify the scan size of the document.
You can also specify an arbitrary size (in unit of
millimeter or 1/16 inch).
In addition, you can also specify the erase position and
erase width.