Return; Reset; Factory Reset; Exit - EverFocus EQ610 Operation Instructions Manual

1/3” color day/night plus wide dynamic range box style camera
Hide thumbs Also See for EQ610:
Table of Contents

Advertisement

5.9.4 RETURN

Press "RET" to saves all settings in the ADJUST menu and returns to the previous menu.
Press "END" to save all the menu settings and exit.

5.10 RESET

5.10.1 FACTORY RESET

Reset to the default settings.
5.10.2 RETURN
Press "RET" to return to the previous menu.
Press "END" to exit.

5.11 EXIT

Save all the menu settings and exit.
NOTE:
If you quit a Menu without pressing EXIT, all the settings you previously modified will NOT be
saved.

6. HOW TO CONTROL AN EQ610 BY A KEYBOARD

1. Press IRIS + key to enter the setup menu. If the item has its own setting menu (sign
the IRIS + button again to display the sub-menu.
2. Move the joystick
allows you to move between selection items in setup menu.
3. Move the joystick
changes each time as the item is selected by joystick.
4. Move the joystick
changes each time as the item is selected by joystick.
Note:
When remotely controlled using RS-485, the SET/ENTER button function is equivalent to the bit
1
pattern sent when one presses the IRIS + button. Thus use the IRIS + button on the keyboard or DVR
in place of the SET/ENTER button when remotely controlling the EQ610.
RS-485 has a higher priority than control at the camera itself. If there is any conflict between local
2
and remote control, the camera will follow the commands from the remote site.
to move the cursor downwards and
to select or adjust the parameters of the selected item. The parameter
to select or adjust the parameters of the selected item. The parameter
to move the cursor upwards. This
- 24 -
), press

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents