Setting Your Fax Machine For Multiple Resolution Transmission - Brother LaserFax IntelliFAX 3550 Owner's Manual

FAX TRANSMISSION OPTIONS
SENDING FAXES
Setting Your Fax Machine for Multiple Resolution Transmission
This is a temporary setting for the current transmission job only. You can set the resolution of the
documents you send by pressing Resolution. Once you set the resolution, all the pages will be
sent at the same resolution. However, there may be times when you want to send some pages at
one resolution, such as "standard", and other pages in another resolution, such as "Photo." If you
send all pages in Photo resolution, for instance, it would take a great deal of time. It is better to
specify the resolution for each page to minimize transmission time. This is made possible by using
the 1.TEMP. SETTINGS function.
__ I: 11 *] [,1_ IL'_'Av,vlIII I!,1: [elvlv_
( 09/12/1996 15:25 )
1. feeder.Insert the documents into the ( ((-_FAX _:_COPY: N0.PRESS & STARTcoPY)))
2. Press Function.
3. Press 1.
4. Press 5.
5. Press --_ (left arrow) or ...- (right
arrow) to find the resolution you
want for the first page of your
documents.
Example: FINE.
6. Press Set.
Return to Step 5 to set the resolution for
Page 2 and the following pages.
7. When you finish setting the
resolution for all your pages, press
Stop.
8. Enter the fax number.
9. Press Start.
The resolution will revert to STANDARD
after the documents have been sent.
( 1.TEMP.SETTINGS ]
( i. TF'MP.SETTINGS ]
("5. RESOLUTION )
(_PAGE 01:STANDARD
])
( SELECT ÷ ÷ & SET )
(_-COPY: PRESS COPY )