Transmission Verification (Xmit) Report - Brother LaserFax IntelliFAX 3550 Owner's Manual

PRINTING REPORTS AND LISTS
I ALL DIAL LIST 1
TIME
NAME
FAX
TEL
: 09/12/1996 15:25
: BROTHER
: 4155554444
: 4155554445
SPEED-DIAL
NUMBER
#01
I#o2_
FAX/TEL NUMBER I DESTINATION GROUP
I
5892786 Fil I BROWNE M.
1234567 i I W. COMPANY
03-256-1121 FAX TOKYO OFFICE
5555151 @ :CHAIN MANCHESTER
__
Transmission Verification (Xmit) Report
The Transmission Verification Report can be used as proof that you sent a fax. It lists the name
or fax number of the receiving party, the time and date of transmission, and whether the
transmission was successful. The factory default setting is OFF.
OFF: The report will be printed automatically only ifan error occurs during transmission. Ifthe
report says "Result: NG" then send all the pages again. If the report says "Result: Check
readability of transmitted page(s) 02, 05" then send only pages 2 and 5 again.
ON: A report will be printed automatically. It is important to read the result of each report to
check that the transmission was successful.
_l-'l_ D][-'] d !'-'VAVJ III I![-'1" [e],v,_.l-_
1. Press
Function.
2. Press 3.
3. Press 7.
4. Press --9 (left arrow) or m,_ fright
arrow) to choose the setting.
Example: ON.
5. Press Set.
6. Press Stop to exit.
09/12/1996 15:25
)
( 1.TEMP.SETTINGS )
( 3.PRINT REPORTS )
7.XMIT
REPORT
)
( XMIT 'REPORT :OFF ))_
(
{ SELECT (- --> & SET
( XMIT REPORT:ON )
7.XMIT REPORT )
11-4
I T I