Changing Enclosure And Device Configurations; Recovering The Administrator Password - HP Integrity Superdome 2 User Manual

Changing enclosure and device configurations

After completing the First Time Setup Wizard, return to the Onboard Administrator GUI to make
configuration changes at any time. See
and enclosure devices" (page 70)
device configuration, user setup, and LDAP server settings and LDAP groups.
See "Enclosure power management" (page 120)

Recovering the administrator password

If the administrator password has been lost, you can reset the administrator password to the factory
default that shipped on the tag with the Onboard Administrator module. The Onboard Administrator
resets a lost password to Lost Password mode. To recover the password and reset the administrator
password to the factory default:
1. Connect a computer to the serial port of the active Onboard Administrator using a null-modem
cable.
2. With a null-modem cable (9600 N, 8, 1, VT100, locally connect to the Onboard Administrator),
open HyperTerminal (in Microsoft Windows) or a suitable terminal window (in Linux).
3. Connect to the active Onboard Administrator.
4. Press the Onboard Administrator reset button for 5 seconds.
5. Press L to boot the system in the Lost Password mode. The password appears as the system
reboots.
"Configuring HP Integrity Superdome 2 compute enclosures
for information that helps you make changes to enclosure and
for information on enclosure power settings.
Changing enclosure and device configurations 17