Tcp/Ip Settings For Standby Onboard Administrator; Standby Onboard Administrator Virtual Buttons Tab; Standby Certificate Request Tab; Standby Onboard Administrator Certificate Upload Tab - HP Integrity Superdome 2 User Manual

and write them down. When looking at the enclosure from the rear, the bay on the left is bay 1,
while the bay on the right is bay 2. When the Active Onboard Administrator transitions to the
Standby Onboard Administrator, the DNS host name and IP addresses remains the same. To
connect to the new Active Onboard Administrator, you must completely close your browser and
connect to the host name or IP address of the former Standby Onboard Administrator.
Status, Information, and Virtual Buttons tabs
The information under the Status, Information, and Virtual Buttons tabs is the same as it is for an
active Onboard Administrator. For information on these tabs, see
screen" (page

TCP/IP Settings for Standby Onboard Administrator

This screen displays the current TCP/IP settings for the Onboard Administrator.
Information
Box
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Onboard Administrator Name (DNS Host Name)- The name of the Onboard Administrator. The
default for this box is the DNS host name.
To modify the TCP/IP settings, select Click here.

Standby Onboard Administrator Virtual Buttons tab

The Virtual Buttons tab is the same as it is for an active Onboard Administrator. For information
on this tab, see

Standby Certificate Request tab

The standby Certificate Request tab is the same as it is for an active Onboard Administrator. For
information on this tab, see

Standby Onboard Administrator Certificate Upload tab

The standby Certificate Upload tab is the same as it is for an active Onboard Administrator. For
information on this tab, see
100 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
88).
"Active Onboard Administrator Virtual Buttons tab" (page
"Certificate Request tab" (page
"Active Onboard Administrator Certificate Upload tab" (page
"Active Onboard Administrator
Description
The Onboard Administrator MAC address. This is an
informational box and cannot be changed.
Static IP address for the Onboard Administrator (required
if static IP settings is selected)
Subnet mask for the Onboard Administrator (required if
static IP settings is selected)
Gateway address for the Onboard Administrator (required
if static IP settings is selected)
The IP address for the primary DNS server
The IP address for the secondary DNS server
93).
90).
96).