HP Integrity Superdome 2 User Manual page 37

The Door Display status menu displays the following information:
Complex name—The user-specified name of the complex.
Complex health—The current health status of the complex.
If there is an enclosure in the complex that now has fault conditions, the enclosure will be
highlighted amber and indicated with a fault symbol.
Active (OA) IP address—The IP address of the active Onboard Administrator.
Service IP address—The IP address of the complex service port.
Enclosure power—The current power consumption of the enclosures in the complex in kW.
Enclosure temperature—The current temperature of the enclosures in the complex in °C or °F.
Enclosure UID—If an enclosure in the complex has the enclosure UID enabled, the enclosure
will be indicated with a UID symbol.
The Door Display status menu has the following menu buttons:
Display Settings—Press this button to display the Display Settings menu.
UID—Press this button to display the UID control overlay.
If the rack contains two SD2- 1 6s complexes, the Door Display status menu displays the following
buttons:
Upper Complex— Displays the status of the upper complex in the rack.
Lower Complex— Displays the status of the lower complex in the rack.
Logon— If the OA log on information is not specified for an enclosure in the rack, select this
option to enter the OA log on information.
UID control
To change the UID of enclosures in the rack, push the On/Off toggle button for the enclosures.
Press Confirm to turn on or off the enclosure UIDs and return to the Door Display status menu. Press
Cancel to return to the Door Display status menu without making any changes.
Setting up the Door Display 37