Cf_Imageadj Command - Sanyo PLC-WM5500/L - 5500 Lumens Manual

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications

8.4.13 CF_IMAGEADJ Command

Command "CF_IMAGEADJ_%1"[CR]
"RST"------ Reset adjusted value for the Image
"STR1"---- Store current adjusted value to Image 1
"STR2"---- Store current adjusted value to Image 2
"STR3"---- Store current adjusted value to Image 3
"STR4"---- Store current adjusted value to Image 4
%1
"STR5"---- Store current adjusted value to Image 5
"STR6"---- Store current adjusted value to Image 6
"STR7"---- Store current adjusted value to Image 7
"STR8"---- Store current adjusted value to Image 8
"STR9"---- Store current adjusted value to Image 9
"STR10"---- Store current adjusted value to Image 10
Reset or Store adjusted value for Image.
(Available only in the normal Power ON status)
"STR1"-"STR10" corresponds to "Image1"-"Image10" displayed in projector OSD
Details
menu on selecting "Store" for adjusted value of Image. The setting value set in
"Image1" to "Image10" is stored and can be retrieved when turning on the
projector again after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
23/88