Cf_Pipmodefree Command; Cf_Piprst Command; Cf_ Hdmi Setup Command; Cf_Hdmi Sound Command - Sanyo PLC-WM5500/L - 5500 Lumens Manual

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications

8.10.15 CF_PIPMODEFREE Command

Command "CF_PIPMODEFREE_%1" [CR]
"USER1" --------------------------- Set User1 to Free status
"USER 2" -------------------------- Set User2 to Free status
%1 "USER 3" -------------------------- Set User3 to Free status
"USER 4" -------------------------- Set User4 to Free status
"USER 5" -------------------------- Set User5 to Free status
Delete the data registered in Custom User1–5 and returns it to Free status.
This command operates the same way as setting Mode free for User1-5 in "Picture
Details in Picture" Menu.
(Available only in the normal Power ON status)
*When there is only one user mode of stored state, return "101" [CR]
Acceptable
Response
Unacceptable

8.10.16 CF_PIPRST Command

Command "CF_PIPRST_%1" [CR]
%1 "RST" ---------------------- Reset current setting status
Reset current setting status of "Picture in Picture".
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.10.17 CF_ HDMI SETUP Command

Command "CF_ HDMI SETUP _%1"[CR]
"NORMAL" -------------------------- Select Normal mode
%1
"ENHANCED" ---------------------- Select Enhanced mode
Select image mode of HDMI setup.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.18 CF_HDMI SOUND Command

Command "CF_HDMI SOUND_%1"[CR]
"HDMI" ----------------------- Select PCM sound (Digital sound)
%1
"EXTERNAL" ------------- Select External sound input
Select sound mode of HDMI setup.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
45/88